Table of Contents
Advertisement
en PowerBoost
Use
or to select the cooking time.
2.
a The time begins to count down.
Notes
¡ You can automatically set the same cooking time for
all cooking zones. You can find more information
about this under
→ "Basic settings", Page 18.
¡ If you select the CombiZone function for the com-
bined cooking zone, the set time for both cooking
zones is the same.
Changing or deleting the cooking time
1.
Select the cooking zone.
Touch .
2.
To change the cooking time, touch or
3.
to .
PowerBoost
12 PowerBoost
Allows larger volumes of water to be heated more
quickly than with the power level .
This function is available for all cooking zones if no
other cooking zone is in use.
Otherwise
and
flash in the power level display.
Childproof lock
13 Childproof lock
The hob is equipped with a childproof lock. This pre-
vents children from switching on the hob.
To switch the function on, switch the hob off.
Touch
for four seconds to switch on or off.
Basic settings
14 Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
Display
Setting
Childproof lock
Audible signals
Automatic switch-off of the cooking zones.
Duration of the timer end signal tone
Factory setting
1
18
11.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the hotplates.
Setting the kitchen timer
Select the hotplate and touch
1.
a
beside lights up.
Use
2.
a The time counts down.
Changing or deleting the timer duration
Touch repeatedly until the display beside
1.
or set it
lights up.
To change the cooking time, touch or
2.
to .
Press
Note: In the combi zone, you can only activate the
PowerBoost function if you are using the two cooking
zones as two independent cooking zones.
If you want to activate the childproof lock automatically
every time the hob is switched off, you can find further
information under Basic settings → Page 18.
Value
- Manual.
Automatic.
– Switched off.
– Confirmation and fault signals are switched off.
– Only the fault signal is switched on.
– Only the confirmation signal is switched on.
– All signal tones are switched on
– switched off.
-
- minutes until the appliance switches off auto-
matically.
– 10 seconds
– 30 seconds
- 1 minute
or
to select the required time.
to switch on or off.
1
1
1
twice.
or set it
1
.
Advertisement
Table of Contents
