Table of Contents
Advertisement
en Operating the hotplate
8.1 Initial configuration
You have to implement settings for the initial configura-
tion before you can use your appliance.
Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
off
position.
1.
Use
or
to set the time.
Press
.
2.
a The time that is set appears in the display.
Tip: You can define whether the time is shown in the
display in the basic settings → Page 18.
8.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
Operating the hotplate
9 Operating the hotplate
You can find out everything you need to know about
operating your hotplate here.
9.1 Switching the hob on and off
Switch the hob on and off using the main switch
▶
If all of the cooking zones are switched off for
longer than 20 seconds, the hob is automatically
switched off.
ReStart
If you switch the appliance on within four seconds of
▶
switching it off, the hob operates with the settings
that were previously set.
9.2 Setting the cooking zones
To choose the required selectable power level, touch
or
.
Each power level has an intermediate level. This is
marked with a dot.
Power level
Selecting the cooking zone and power setting
Touch
to select the cooking zone.
1.
Within the next 10 seconds, select the required
2.
power level:
Touch
to call up power level .
‒
Touch
to call up power level .
‒
a The power level has been set.
Note: If no cookware is placed on the cooking zone or
the pot is not suitable, the selected power level flashes.
After a certain period of time, the cooking zone
switches itself off.
16
Lowest power level
Highest power level
Remove the accessory and the leftover packaging,
1.
such as polystyrene pellets, from the cooking com-
partment.
Before heating, wipe the smooth surfaces in the
2.
cooking compartment with a soft, damp cloth.
Ventilate the room while the appliance is heating.
3.
Set the type of heating and the temperature.
4.
→ "Basic operation", Page 20
Type of heat-
ing
Temperature
Cooking time
Switch off the appliance after the specified cooking
5.
time.
Wait until the cooking compartment has cooled
6.
down.
Clean the smooth surfaces with soapy water and a
7.
dish cloth.
Clean the accessory with soapy water and a dish
8.
cloth or a soft brush.
QuickStart
If you place cookware on the hob before you switch
▶
it on, the cookware is detected when you switch on
and the corresponding cooking zone is selected
automatically. Select the power level in the next 20
.
seconds, or the hob switches itself off.
Changing the power level and switching off the
cooking zone
Select the cooking zone.
1.
Touch
or
2.
pears. To switch off the cooking zone, set .
Switching off the cooking zone quickly
Touch and hold the symbol for the cooking zone for
three seconds. The cooking zone switches itself off.
9.3 Cooking recommendations
The table shows which power level (
which food. The cooking time (
pending on the type, weight, thickness and quality of
the food. To preheat, set power level 8–9.
Melting
Butter, honey, gelatine
Heating and keeping warm
Boiled sausages
Defrosting and heating
Spinach, frozen
Poaching, simmering
Potato dumplings
1
Without lid
Preheat to power level 8 - 8.
2
3D hot air
Maximum
1 hour
until the required power level ap-
) may vary de-
1 - 2
1
3 - 4
3 - 4
1
4. - 5.
) is suitable for
-
-
15 - 25
20 - 30
Advertisement
Table of Contents
