Main Parts - Stihl MS 261 C-M Instruction Manual

English

32 Main Parts

2, 3
1
17
16
1
15
14
1 Shroud Lock
2 Manual Fuel Pump
3 Handle Heating Switch
4 Decompression Valve
ting)
5 Shutter (Summer and Winter Operation)
6 Chain Brake
7 Chain Sprocket
8 Chain Sprocket Cover
9 Chain Catcher
10 Side Chain Tensioner
11 Bumper Spike
12 Guide Bar
13 Oilomatic Saw Chain
14 Oil Filler Cap
15 Muffler (with Spark Arresting Screen)
16 Front Hand Guard
17 Front Handle (Handlebar)
18 Spark Plug Boot
19 Starter Grip
20 Fuel Filler Cap
1)
Depending on Model
38
4
#
5
6
11
7
10
8
9
18
1
19
21
23
24
22
25
20
1)
1)
1)
(Automatically Reset‐
1)
21 Master Control Lever
22 Throttle Trigger
23 Throttle Trigger Lockout
24 Rear Handle
25 Rear Hand Guard
# Serial Number
12
32.1 Definitions
13
1 Shroud Lock
Lock for the shroud.
2 Manual Fuel Pump
Provides additional fuel feed for a cold start.
3 Handle Heating Switch
For switching the electric handle heating on
and off.
4 Decompression Valve (Automatically Reset‐
ting)
Releases compression pressure to make
engine starting easier – when activated.
5 Shutter (Summer and Winter Operation)
With summer and winter positions. Carburetor
is heated in winter position.
6 Chain Brake
A device to stop the rotation of the chain. Is
activated in a kickback situation by the opera‐
tor's hand or by inertia.
7 Chain Sprocket
The toothed wheel that drives the saw chain.
8 Chain Sprocket Cover
Covers the clutch and chain sprocket.
9 Chain Catcher
Helps to reduce the risk of operator contact
by a chain when it breaks or comes off the
bar.
10 Side Chain Tensioner
Permits precise adjustment of chain tension.
11 Bumper Spike
Toothed stop for holding saw steady against
wood.
12 Guide Bar
Supports and guides the saw chain.
13 Oilomatic Saw Chain
A loop consisting of cutters, tie straps and
drive links.
14 Oil Filler Cap
32 Main Parts
0458-153-8221-C