Download Print this page

Chain Lubricant - Stihl MS 261 C-M Instruction Manual

Hide thumbs Also See for MS 261 C-M:

Advertisement

Available languages

Available languages

English
► Fold the grip down.
Tank cap is locked.
10.5
If the tank cap cannot be
locked in the fuel tank opening
Bottom of cap is twisted in relation to top.
► Remove the cap from the fuel tank and check
it from above.
Left:
Bottom of cap is twisted – inner
mark (1) in line with outer mark.
Right:
Bottom of cap in correct position –
inner mark is under the grip. It is not
in line with the outer mark.
20
1
► Place the cap on the opening and rotate it
counterclockwise until it engages the filler
neck.
► Continue rotating the cap counterclockwise
(about a quarter turn) – this causes the bottom
of the cap to be turned to the correct position.
► Turn the cap clockwise and lock it in position –
see section on "Closing".

11 Chain Lubricant

For automatic and reliable lubrication of the
chain and guide bar – use only an environmen‐
tally compatible quality chain and bar lubricant.
Rapidly biodegradable STIHL BioPlus is recom‐
mended.
NOTICE
Biological chain oil must be resistant to aging
(e.g. STIHL BioPlus), since it will otherwise
quickly turn to resin. This results in hard deposits
that are difficult to remove, especially in the area
of the chain drive and chain. It may even cause
the oil pump to seize.
The service life of the chain and guide bar
depends on the quality of the lubricant. It is
therefore essential to use only a specially formu‐
lated chain lubricant.
11 Chain Lubricant
0458-153-8221-C

Advertisement

loading