Advertisement

Quick Links

INSTALLATION MANUAL
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Installed Attachment Tabs
Height
21"
Width
31-1/4"

Parts List

Item Qty Description
1
2
Tow bar base plate, universal
2
1
Safety cable loop
mounting plate, driver side
3
1
Safety cable loop
mounting plate, passenger side
4
2
Tow bar mounting tab
5
2
Safety cable, 7,500 lbs.
6
4
Hex bolt, 1/2"-13 x 5", grade 8
7
4
Conical-toothed washer, 1/2"
8
4
Flange nut, 1/2"-13, grade 8
9
2
Quick link, 1/2"
10
2
Socket plug

Tools Required

Torque wrench
Drill
Ratchet
Drill bit, 1/2"
Socket, 3/4" (short)
Wrench, 18mm
Socket, 18mm (short) Reciprocating saw
Socket extension, 3" --
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
WARNING
Never exceed the vehicle manufacturer's recommended gross vehicle weight rating (GVWR).
Product Photo
Not pictured: Safety cables, quick links and socket plugs
CAUTION
Take care when cutting any plastic or metal as injury may occur if done improperly.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires:
• Recovery loop removal
• Drilling
• Trimming
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
If equipped, we recommend removing the base plate attachment tabs when not in use.

SAFETY INSTRUCTIONS

Safety glasses should be worn at all times while installing this product.

Product Registration and Warranty

CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
70141-INS-RA
08/19/2021
ECN8762
PAGE 1
70141

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 70141 and is the answer not in the manual?

Questions and answers

Summary of Contents for curt 70141

  • Page 1 Safety glasses should be worn at all times while installing this product. Product Registration and Warranty CURT stands behind our products with industry-leading warranties. To get copies of the product warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys CURTMFG.COM •...
  • Page 2 Tow bar mounting tab Safety cable, 7,500 lbs. Hex bolt, 1/2"-13 x 5", grade 8 Conical-toothed washer, 1/2" Flange nut, 1/2"-13, grade 8 Quick link, 1/2" Socket plug CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70141-INS-RA • 08/19/2021 • ECN8762 • PAGE 2...
  • Page 3 Pull the foam-backed plastic trim from between the frame rails and bumper cover. Return hooks, bolts and foam trim to vehicle owner. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70141-INS-RA • 08/19/2021 • ECN8762 • PAGE 3...
  • Page 4 Secure with 1/2” flange nuts (#8). Make sure the bent tabs on the mounting plate are facing the center of the vehicle. Step 7 Torque all 1/2” fasteners to 110 lb-ft. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70141-INS-RA • 08/19/2021 • ECN8762 • PAGE 4...
  • Page 5 When ready to tow, install the tow bar mounting tabs (#4). When not towing, insert the socket plugs (#10) into the ends of the tow bar base plates (#1). Final Installed Image CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70141-INS-RA • 08/19/2021 • ECN8762 • PAGE 5...
  • Page 6 Do not tow with worn or damaged parts. Vehicle manufacturer's recommendations Review the owner's manual for your towed vehicle and towing vehicle for specific recommendations, capacities and requirements. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70141-INS-RA • 08/19/2021 • ECN8762 • PAGE 6...

Table of Contents