Download Print this page

Advertisement

Quick Links

INSTALLATION MANUAL
Level of Difficulty
Difficult
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Installed Attachment Tabs
Height
17-1/2"
Width
35"
Parts List
Item Qty Description
1
1
Tow bar base plate, driver
2
1
Tow bar base plate, passenger
3
2
Tow bar mounting tab
4
2
Safety cable, 7,500 lbs.
5
8
Square hole spacer,
1/4" x 1" x 2-1/2"
6
8
Carriage bolt,
1/2"-13 x 2", grade 8
7
8
Flange nut, 1/2"-13, grade 8
8
4
Quick link, 1/2"
9
2
Socket plug
Tools Required
Torque wrench
Drill
Socket, 3/4"
Drill bit, 17/32"
Socket, 7/16"
T30 Torx bit
Socket, 8mm
Wrench, 7/16"
Socket, 10mm
Wrench, 3/4"
Socket, 15mm
Tape measure
Socket, 21mm
Fishwire, 1/2"
(includes four)
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
WARNING
Never exceed the vehicle manufacturer's recommended gross vehicle weight rating (GVWR).
Product Photo
Not pictured: Safety cables, quick links and socket plugs
CAUTION
Take care when cutting any plastic or metal as injury may occur if done improperly.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires the front bumper to be removed
and reinstalled. Some drilling and trimming are required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
If equipped, we recommend removing the base plate attachment tabs when not in use.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
70130-INS-RA
02/26/2021
ECN8061
PAGE 1
70130

Advertisement

loading
Need help?

Need help?

Do you have a question about the 70130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for curt 70130

  • Page 1 Safety glasses should be worn at all times while installing this product. Product Registration and Warranty CURT stands behind our products with industry-leading warranties. To get copies of the product warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys CURTMFG.COM •...
  • Page 2 Square hole spacer, 1/4" x 1" x 2-1/2" Carriage bolt, 1/2"-13 x 2", grade 8 Flange nut, 1/2"-13, grade 8 Quick link, 1/2" Socket plug Included fishwire CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 • PAGE 2...
  • Page 3: Bumper Removal

    Skip to Step 12. 2015-2020 F-150 Step 4 Using a non-marring pry tool, remove the plastic cover insert and license plate holder from the bumper and set it aside. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 • PAGE 3...
  • Page 4 This may be done while removing the bumper. These attach the bumper to the flexible rubber dirt guard. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 • PAGE 4...
  • Page 5 Starting on the outer edges, pull the bumper cover out, releasing the clips. Work your way toward the center of the vehicle, unclipping the bumper cover. Carefully remove the bumper cover and set it aside so it will not be damaged during the rest of the installation. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 •...
  • Page 6 Note: For vehicles without tow hooks, use the supplied 1/2" carriage bolts (#6), square hole spacers (#5) and 1/2" flange nuts (#7). Torque the bolts to 110 lb-ft. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 • PAGE 6...
  • Page 7 When ready to tow, install the tow bar mounting tabs (#3). When not towing, insert the socket plugs (#9) into the ends of the tow bar base plates (#1, #2). CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 • PAGE 7...
  • Page 8: Safety Cable Installation

    Do not tow with worn or damaged parts. Towing vehicle and trailer Review the owner's manual for your towing vehicle and trailer manufacturer's recommendations for specific recommendations, capacities and requirements. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70130-INS-RA • 02/26/2021 • ECN8061 • PAGE 8...