curt 13040 Manual

13040 / 78144 / RHH13040
11/16/2007
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
ITEM QTY PART NUMBER
1 6 CM-SP1
2 6 HFN 1213
3 6
1/2-13 x 1 3/4
FRAME RAIL
HITCH WEIGHT: 40.8 LBS.
10
INSTALL TIME: MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
INSTALLATION STEPS
1) Raise hitch into position.
2) Using existing, holes in the frame place 1/2" bolts and spacers through the access slots and
into the
hitch throught the holes in the frame. Tighten with 1/2" flange nuts.
3) Torque all fasteners to 75 lb-ft.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
Parts List
DESCRIPTION
.250 x 1.50 x 2.00" SQUARE HOLE SPACER
HEX FLANGE NUT
CARRIAGE BOLT
CHEVY/GMC VAN
SAVANNAH / EXPRESS (full size)
6,000
LBS. TRAILER WEIGHT &
10,000
LBS. TRAILER WEIGHT &
3
2
1
600 LBS. TONGUE WEIGHT.
1,000
LBS. TONGUE WEIGHT