Download Print this page

Advertisement

Quick Links

INSTALLATION MANUAL
Level of Difficulty
Difficult
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Installed Attachment Tabs
Height
16"
Width
20"
Parts List
Item Qty Description
1
1
Tow bar base plate
2
2
Tow bar mounting tab
3
2
Safety cable, 7,500 lbs.
4
4
Square hole spacer,
1/4" x 1" x 2"
5
4
Carriage bolt,
3/8"-16 x 1-1/2", grade 8
6
4
Hex head bolt,
3/8"-16 x 1-1/4", grade 8
7
4
Lock washer, 3/8"
8
4
Nylock nut, 3/8"-16, grade 8
9
4
Flange nut, 3/8"-16, grade 8
10
2
Quick link, 1/2"
11
2
Socket plug
Tools Required
Torque wrench
Drill
Socket, 7mm
Drill bit, 3/8"
Socket, 7/16"
Nut driver, 5/16"
Socket, 9/16"
T15 Torx
Wrench, 7/16"
Tape measure
Wrench, 9/16"
Phillips screwdriver
Utility knife
Flat head screwdriver
Paint pen
Aviator shears
Large vise grip
Fishwire, 3/8"
(includes four)
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
WARNING
Never exceed the vehicle manufacturer's recommended gross vehicle weight rating (GVWR).
Product Photo
Not pictured: Safety cables, quick links and socket plugs
CAUTION
Take care when cutting any plastic or metal as injury may occur if done improperly.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires the front fascia panel to be temporarily
removed and reinstalled. Some drilling and trimming are required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
If equipped, we recommend removing the base plate attachment tabs when not in use.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
70118-INS-RC
04/14/2020
ECN6926
PAGE 1
70118

Advertisement

loading
Need help?

Need help?

Do you have a question about the 70118 and is the answer not in the manual?

Questions and answers

Summary of Contents for curt 70118

  • Page 1 Paint pen Aviator shears Product Registration and Warranty Large vise grip Fishwire, 3/8" CURT stands behind our products with industry-leading warranties. To get copies of the product (includes four) warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys CURTMFG.COM •...
  • Page 2 Hex head bolt, 3/8"-16 x 1-1/4", grade 8 Lock washer, 3/8" Nylock nut, 3/8"-16, grade 8 Flange nut, 3/8"-16, grade 8 Quick link, 1/2" Socket plug Included fishwire CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 2...
  • Page 3 Carefully pull the plastic wheel edge trim piece in front of the tire to allow access to the bumper cover. Repeat on the other side of the vehicle. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 3...
  • Page 4 Step 5 Use a 7mm socket to remove the ten bolts along the underside of the vehicle – three on each side and four in the center. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 4...
  • Page 5 Use a tin snips or aviator shears to cut off the marked areas. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 5...
  • Page 6 3/8" holes into the lower frame pinch seam. Insert a 3/8" hex head bolt (#6) and 3/8" lock washer (#7) into each hole. Secure them with 3/8" nylock nuts (#8). CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 6...
  • Page 7 When ready to tow, install the tow bar mounting tabs (#2). When not towing, insert the socket plugs (#11) into the ends of the tow bar base plate (#1). Final Installed Image CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 7...
  • Page 8: Safety Cable Installation

    Do not tow with worn or damaged parts. Towing vehicle and trailer Review the owner's manual for your towing vehicle and trailer manufacturer's recommendations for specific recommendations, capacities and requirements. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 70118-INS-RC • 04/14/2020 • ECN6926 • PAGE 8...