Safety Instructions - Eneo IAD-5SG1004MUC Quick Installation Manual

SAFETY INSTRUCTIONS

Read the safety instructions and the operating instructions carefully before installing the
product� Depending on the product type, individual points may be omitted�
Mounting & Installation
• Ensure that the intended mounting location is suitable for the respective product (e�g� in terms of
weight)�
• Securely fasten the products to the locations and surfaces recommended by the manufacturer to
ensure stability and safety�
• Ensure that the products are weatherproof when installed outdoors, e�g� protect cameras from
direct sunlight or extreme temperatures�
• Make sure that any ventilation slots are not blocked to ensure sufficient air circulation and cooling�
• Make sure that cameras, switches, etc� are installed with sufficient safety distance to flammable
materials, power sources, running water, etc�
• Assembly, commissioning and maintenance may only be carried out by authorized specialist
personnel in compliance with the relevant standards and guidelines�
Power supply & wiring
• To ensure a safe power supply, use only power supplies and cables recommended by the
manufacturer�
• Make sure that the cables are properly routed and protected from tampering and damage (e�g�
kinking) to avoid power failures or short circuits (e�g� due to moisture ingress)�
• Make sure that the cables are not routed through doors, windows or other moving parts to
avoid damage and tripping hazards�
• To disconnect the system from the power supply, pull the cable only by the plug and never
directly by the cable�
• When shortening flexible connection cables, use wire end ferrules�
4