Table of Contents
Related Manuals for HADEF 208/05
Summary of Contents for HADEF 208/05
- Page 1 Installation, Operating and Maintenance Instructions Monorail Trolleys as monorail push travel trolley 208/05 as monorail hand geared trolley 209/05 with threaded bold 208/05 209/05 208/05G 209/05G Rev.04 5.52.695.00.01.04...
-
Page 2: Table Of Contents
Heinrich de Fries GmbH Heinrich de Fries GmbH, Gauss Str. 20, D-40235 Düsseldorf Heinrich De Fries GmbH will be named HADEF in the following text. Original operating- and maintenance instructions in German language. Translation in other languages is made of the German original. -
Page 3: Information
Failure to follow the instructions of this manual can lead to unpredictable hazards. For any resulting damage or personal injury, HADEF assumes no liability. The unit was designed and built following a risk analysis and careful selection of the harmonized standards that are to be complied with, as well as other technical specifications. -
Page 4: Requirements For The Operating Personnel
Our delivery includes the hoist supplied beginning at its suspension and ending at the load hook and if supplied with control, the control line/hose that leads to the hoist. Further operating material, tools, load attaching devices as well as main energy supply lines must be assembled according to the valid rules and regulations. -
Page 5: Basic Safety Measures
The permissible ambient temperature when operating the devices: Device classification for Type of drive Explosive atmosphere not explosive atmosphere )* )** according to ATEX Manually driven -20°C/+50°C -20°C/+40°C Motor driven -20°C/+40°C -20°C/+40°C ) * At an atmospheric pressure range from 0.8bar to 1.1bar and an oxygen content of approx. 21% ) ** Devices of this category have been specially modified and labeled by the manufacturer DANGER! The ambient temperature range must not be exceeded! -
Page 6: Safety Device For Transport
for scenic use when persons are under suspended loads Design Type 208/05 as push travel Type 209/05 as hand geared trolley Type 208/05G with threaded load bolt Type 209/05G with threaded load bolt Functions Push travel trolley: The trolley is moved by pushing the load. -
Page 7: Important Components
Capacity hand chain at load bar size off 30 m of force with hand chain tread load bar G 1N G 2N 209/05 209/05 208/05 209/05 Without hand- chain 64-152 153-310 50-220 90-305 7 (5) 1000 64-190 191-310 58-220... -
Page 8: Installation On The Beam
There are distance tubes (5) and/or washers (6) situated on the load bars (2) of the trolley. Dimension "X" is set by placing washers (6) from the outer to the inner side ("X" increases) or from the inner to the outer side ("X" decreases). -
Page 9: Commissioning
Commissioning General The operator of the unit is responsible for the entire system. According to the Ordinance on Industrial Safety and Health, a hazard analysis must be carried out by the operator. Observe the respective national standards, regulations and directives of the responsible bodies at the place of operation. -
Page 10: Inspection
Inspection 12.1 Periodic checks Independently from the regulations of the individual countries, lifting devices must be checked at least yearly by a qualified person or licensed qualified person regarding its functional safety. daily 1st maintenance Inspection Inspection commissioning checks after Maintenance Maintenance 3 months... - Page 11 Decommissioning WARNING! It is essential that the following points are observed in order to prevent damage to the equipment or critical injury when the device is being decommissioned: It is mandatory that all steps for decommissioning the machine are carried out in the indicated sequence: ...