Related Manuals for HADEF 147/05
Summary of Contents for HADEF 147/05
- Page 1 Installation, Operating and Maintenance Instructions HADEF Aluminium Wire Rope Pull Hoist Type 147/05 5.52.270.00.01.04 Rev.04...
-
Page 2: Table Of Contents
Heinrich de Fries GmbH Heinrich de Fries GmbH, Gauss Str. 20, D-40235 Düsseldorf Heinrich De Fries GmbH will be named HADEF in the following text. Original operating- and maintenance instructions in German language. Translation in other languages is made of the German original. -
Page 3: Information
11.4 Clamping jaws ....................... 11 Inspection ..................11 12.1 Periodic checks ......................11 12.2 Wire rope ........................11 12.3 Inspection intervals ....................... 11 Service ..................... 11 13.1 Wire rope ........................11 13.2 Lubricant - Selection ..................... 12 13.3 Lubricant for food industry – Selection (as option*) ........... 12 Trouble ..................... -
Page 4: Duty Of Care Of The Owner
Failure to follow the instructions of this manual can lead to unpredictable hazards. For any resulting damage or personal injury, HADEF assumes no liability. The unit was designed and built following a risk analysis and careful selection of the harmonized standards that are to be complied with, as well as other technical specifications. -
Page 5: Appropriate Use
Appropriate use The permitted safe working load of the devices must not be exceeded! An exception can be made during the load test before initial operation, carried out by a licensed qualified person. Defective devices and load suspension devices must not be used until they have been repaired! Only original spare parts must be used. -
Page 6: Transport And Storage
If the equipment has not been used for a period of time, carry out visual checks of all main components such as chains, load hooks etc. and replace any damaged parts with new, original spare parts before putting the equipment back into operation! Do not use a hoist that is defective, pay attention to any abnormal noise it makes during operation. -
Page 7: Design
Design HADEF wirerope hoists are suitable for mobile use. The housing is made of aluminium. Basic model: wirerope hoist Type 147/05 with lever tube including 20 m wirerope with hook and tapered Illustration 1 Functions Durch By moving the lever, the wire rope is moved forwards or backwards through the clamping jaws. -
Page 8: Wire Rope Assembly - Free Running Mechanism
Wire rope assembly - free running mechanism Basic position of the operation levers The free running mechanism of wire rope offers easy feed in and out of the uncharged wire rope during assembly and disassembly of the wire rope. Illustration 2 Insert the wire rope Move lever (A) slightly to the left side. -
Page 9: Fastening Of The Device
Fastening of the device A bolt for a possible fastening of a hook, or other device is provided at the front side. In order to lock it, insert it through the housing and turn it 2 times. Illustration 6 Control Only people that are familiar with the operation of the lifting devices and cranes may be entrusted with their operation. -
Page 10: Wire Rope
NOTICE! Hoists up to 1000 kg capacity and without motor-driven trolleys of hoisting unit must be tested by a “qualified person” before putting into operation for the first time. Hoists of 1000 kg capacity and up or with more than one motor-driven hoist movement; i.e. lifting and trolley movement, must be tested by a “licensed qualified person”... - Page 11 11.4 Clamping jaws If the clamping jaws are worn, they must be replaced by original clamping jaws. Inspection 12.1 Periodic checks Independently from the regulations of the individual countries, lifting devices must be checked at least yearly by a qualified person or licensed qualified person regarding its functional safety. 12.2 Wire rope Adequate performance of the servicing and monitoring work acc.
- Page 12 13.2 Lubricant - Selection FUCHS SHELL ESSO MOBIL TOTAL CASTROL KLÜBER Renolit FEP 2 Alvania EP 2 Unirex EP 2 Mobilux EP 2 MULTIS EP2 Stabylan 5006 Optimol Viscoleb 1500 Klüberoil 4UH 1-1500 Wolfracoat 99113 Chain lubricant OKS 451 13.3 Lubricant for food industry –...
- Page 13 16.1 Temporary decommissioning Measures are as above. Also read the chapter “Transport and storage”. 16.2 Final decommissioning/disposal Measures are as above. After disassembly, ensure that the disposal of the equipment and any materials it contains is carried out in accordance with environmental regulations. 5.52.270.00.01.04...