Panasonic DVD-PA65 Operating Instructions Manual page 41

Settings
■ PCM Down Conversion (DVD-Video only): Output during
play of DVD-Video
recorded in 96 kHz linear PCM.
No
: When you have connected an amplifier with stereo connection cables.
Yes: When you have connected an amplifier with an optical fiber cable.
Copyright protection limits digital output to 48 kHz/16 bit.
When playing DVD-Video recorded in 96 kHz
Sound is output as follows in accordance with the connections and settings you have made.
'''\Qonnection
Setting\^
Analogue Digital
No Output as 96 kHz
No output (Audio will be output at
96 kHz if the DVD-Video has not had
copyright protection recorded on it.*)
Yes
Converted and output as
48 kHz
Converted and output as 48 kHz/16 bit
*The connected equipment must be able to handle 96 kHz LPCM in order to take advan¬
tage of high quality audio found on these discs.
■ Dolby Digital*: Output during play of DVDs recorded with Dolby Digital.
Bitstream:
When you have connected a unit with a built-in Dolby Digital decoder
PCM
: When you have connected a unit that doesn't have a built-in Dolby Digital de¬
coder
■ DTS Digital Surround*: Output during play of DVDs recorded with DTS Digital
Surround.
PCM
: When you have connected a unit that doesn't have a built-in DTS decoder
Bitstream:
When you have connected a unit with a built-in DTS decoder
•Only the motion picture parts of DVD-Audio are affected.
Note
Ensure "Dolby Digital" and "DTS Digital Surround" are set to "PCM" if you connect this unit
to a digital amplifier without a decoder. If the signals are output as bitstream, "noise" will be
output which can cause harm to your ears and speakers and the signal will not be correctly
recorded onto MDs.
41
RQT5603