Stopping Play.15 - Panasonic DVD-PA65 Operating Instructions Manual

Portable dvd audio/video player
Table of Contents

Advertisement

Available languages

Available languages

■ To turn the unit on
The unit can be turned on as follows.
Stopping play
<On the main unit>
HFTZD) HCXO
Slide [ON/OFF, HOLD] to
"ON/OFF" until the display
is turned on.
<On the remote control>
Press [6, POWER],
©
■ To turn the unit off
The unit can be turned off as follows. The
[(b)
indicator lights when you are using the
AC adaptor.
<On the main unit>
owofffi |< ii~ ►fTiHOLD
Slide [ON/OFF, HOLD] to
"ON/OFF" until the display
is turned off.
During play
Press [■].
The position you stopped play at is record¬
ed by the unit when
is flashing on the
unit's display.
Flashes —[LJ'iL-
"
-
=
,
While
is flashing on the unit's display,
press [►] to start play from where you
stopped it
(Resume function).
If you are playing DVD-Video, the following
display also appears.
<On the remote control>
^
Press [(!), POWER].
©
•You cannot use the remote control to turn
the unit on when it is being powered by
the battery pack.
•The unit automatically turns off after being
stopped for 15 minutes (5 minutes when
the battery pack is being used) to save
power.
(Auto power-off function)
■ To prevent accidental operation
qnctfII
U
|| :niw>
Slide (ON/OFF, HOLD] to
"HOLD".
In the hold mode, the unit does not respond
when you press the buttons. If you press a
button in the hold mode, "fl0
Irf"
appears
on the unit's display and the [(!)] indicator
flashes.
To release:
Slide [ON/OFF, HOLD] to "ON/OFF".
Press PLAY to Chapter Preview
Pressing [►] while this is displayed acti¬
vates the Chapter Preview feature.
If you do not press [►], the message dis¬
appears and play starts from where you
stopped it.
Chapter Preview:
The beginning portions ot each chapter up
to the current one are played. Full play re¬
sumes from the point where you stopped
play. (Chapter Preview feature works only
within a title.)
■ To cancel Resume function
Press [■].
•The DVD-Audio group is stored.
•The resume function does not work if the
disc's play time is not displayed.
•The resume position remains in memory
even if the unit is off.
•It is cleared if you open the disc lid.

Advertisement

Table of Contents
loading

Table of Contents