Table of Contents
Advertisement
Table 5-2
Battery description and part number
Description
2 cell, 47 Whr, Li-ion battery
WARNING!
not puncture, twist, or crack the battery.
●
Do
not cause an external puncture or rupture to the battery. Punctures can cause a short inside
●
Do
the battery, which can result in battery thermal runaway.
not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which
●
Do
might puncture the battery.
●
not compress or squeeze the battery case with tools or heavy objects stacked on top of the
Do
case. These actions can apply undue force to the battery.
not touch the connectors with any metallic surface or object, such as metal tools, screws, or
●
Do
coins, which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
WARNING!
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
information. To prevent loss of information, save your work or shut down the computer through
Windows before you remove the battery.
Remove the battery:
1.
Lift the tape (1) off the system board battery connector. You do not need to completely remove the
tape.
2.
Disconnect the battery cable (2) from the system board.
3.
Remove the four Phillips M2.0 × 5.0 screws (3) that secure the battery to the computer.
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
To avoid personal injury and damage to the product:
Bottom cover on page
To reduce potential safety issues, use only the user-replaceable battery provided with the
Removing a battery that is the sole power source for the computer can cause loss of
Preparation for disassembly on page
28).
Spare part number
N85243-001
28).
Advertisement
Table of Contents
