Table of Contents
Advertisement
_'_, Attention:
Turn the power switch off and wait unti/ the /amp has coded
down before
touching it.
:_?_ Please Note:
- The 5W lamp is user-replaceable.
-The 240mW LED lamp is not user-replaceable.
1. Loosen the screw (a) on the left side of the
sewing head and remove the face plate (b).
2. If the machine is equipped with a 5W lamp,
replace the bulb as follows:
Pull light bulb downward to remove.
Replace the bulb with same type rated 5W.
Replace
the face plate
and tighten
the
screw.
3. If the machine is equipped with a 240mW
LED
lamp,
you
must
contact
the
manufacturer or its service agent for repair
in the event of failure.
66
Advertisement
Table of Contents
