Advertisement
FRONT PANEL FACILITIES
@
ARM
ELEVATION
switch
| TURNTABLE:
PL-X55Z/PL-X33Z/PL-855Z/PL-333Z |
oe
* Use the switch for manual play.
* Use the switch to suspend
record play temporarily.
Model PL-X55Z
Model PL-555Z
® Use the switch when changing the tracks during actual play
€
{UP}:
The tonearm rises (the stylus moves
away from the record}.
{DOWN|]:
The tonearm descends {the sivius is lowered onto the record)
@
DISC SIZE switch (only PL-X55Z), SIZE switch {only PL-5552Z)
Set this switch in accordance with the size of the record.
30: For 30 cm LP records. 17: for 17 cm EP reéords.
@ SPEED switch
Set this switch
in accordance with ihe seed of the record.
33: For 33-1/3 rpm records. 45: For 45 rpm records.
Platter
Rubber mat
Platter shaft
EP adaptor
Dust cover
Arm rest
Tonearm
@
START/STOP switch (only PL-X55Z and PL-555Z)
Press this switch when starting auto play or when stopping play.
NOTE:
NOTE:
Be sure to press the switch firmly when starting playback; if not pressed
PL-X33Z and PL-333Z are not equipped with switch @.
i
!
firmly, the platter may rotate without the tonearm moving.
i
@
CUT switch (only PL-X33Z), STOP switch {only PL-333Z)
:
Press this switch when stopping play.
GRAPHIC EQUALIZER CONTROLS
The advantage of the GRAPHIC EQUALIZER over conventional tone controls is
Hl
that with the five controls of the GRAPHIC EQUALIZER it is possible to control
T
five different narrow, distinct sections of the audio band width by up to +8 dB.
= d :
] i =
l
With conventional tone controls a setting for a bass or treble boost or cut will
also affect the lower or upper mid frequencies. The frequency bands controlled
=
f
by the five slide controls have been chosen to yield the maximum possible con-
~
—
-
trol action within the audio spectrum.
OOH
Rae
VE
VSS RHE
TOKE
100 Hz:
= The 100 Hz control is very useful in enhancing low bass notes as in
ALADDIN
I™
:
organ music.
=
330 Hz:
= The 330 Hz control will allow you to vary the upper bass frequencies.
Sf
RS
ORS
ze
Hi
1 kHz:
The 1 kHz control is the presence control and can be used very ef-
fectively to emphasize, or de-emphasize vocalists.
3.3 kHz:
The 3.3 kHz control will add brilliance and clarity to brass in-
struments and violins.
3%
10 kHz:
= The
10 kHz control
can be used to make
up for missing
high
on
frequencies absorbed by the environment and to add a natural
crispness to music.
86660066
Cartridge
Emphasie
frequency range
:
De-emphasize
frequency fange
8
-ARB1001>
Advertisement
