Advertisement
AM/FM
CHANNEL
STEP SWITCH
only &xgsz ana Tx-585z]
This switch
not provided on models for use in Europe,
North America,
or
Australia. (Provided only on models stamped "Z/E" on packing case.}
The AM/FM
channel step switch is located on the rear panel of the digital syn-
thesizer tuner. Before the tuner leaves the factory, this switch is set to the chan-
nel allotment plan of the area in which the tuner is sold. When the TUNING
switch is given a single push, the frequency display will change in the following
units,
Model
CHANNEL STEP
Frequency change
destination
switch position
FM mode | AM mode
Continental
ee
:
:
| Gen
100 kHz10 kHz
100 kHz
10kHz
| Other countries
|
80 kH2/9 kHz
|
BO kHz
9 kHz
NOTE:
«ff the TUNING switch is held in the depressed position,
the traquency
display will change continuously and stop when the switch is rejeased.
© if the switch is set to the wrong position, correct tuning will not be possi-
ble.
Consult your dealer if you are not sure about the channel allotmernt plan in
your area.
7
STEREO CASSETTE TAPE DECK AMPLIFIER
|
The illustration shows model DC-X56Z. The operation of DC-585Z is the same as
that of DC-X552,
Ci?)
®
9006
®
eo
©
[CASSETTE TAPE DECK}
®
This unit is provided with an automatic tape selector function.
°
This unit is a forwerd mode priority auto-reverse deck. Both recording and
playback always start in the forward direction.
If you press the STOP/EJECT (1/4 ) switch during reverse playback, the
head for forward playback will be reselected automatically.
@
REVERSE
MODE
switch
Sets the reverse mode for the playback-only deck.
a
i
Switch positions;
Play
Hl
[
CD
Continuous play
\
mee
=
ei
|
=a)
Reverse play
Continuous playback is automatically stopped after 8 round trips. Note that it
will be counted as one reversal if the tape direction is changed using the direc-
tion switch. (One round trip will be counted if the switch is pressed twice.)
@
Direction switch/indicator {DIRECTION}
Depress to set the playback direction of the playback-only deck. Direction
change can only be performed during playback.
> ... Lights when forward mode is selected.
< ... Lights when reverse mode is selected.
@
Cassette compartment
(Playback only)
The illustration shows model DC-X33Z.
The operation of DC-333Z is the same
as that of DC-X33Z.
@
REVERSE MODE switch
Sets the reverse mode for the record/play deck.
|
Switch positions
Play
Record
Continuous playback is automatically stopped after 8 ¢
will be counted as one reversal if the tape direction is «
tion switch. (One round trip will be counted if the switch is pr
@ Recording indicator (REC}
-
me
Double-side recording |
Continuous play
side recording
Reverse play
Singl
und imps. Note that it
anged using the direc-
twice.)
2... Lights during recording. Flashes during tape copying. (DC-X552 and
DC-555Z only}
@
Direction switch/indicator (DIRECTION)
Depress to set the recording and playback direction of the record/play deck.
Direction change can be performed during recording, playback or pause.
>
... Lights when forward mode is selected. Flashes if tape travel is stopped
during reverse recording.
< ... Lights when reverse mode is selected.
@
Cassette compartment
(Recording and playback)
@
TAPE COUNTER
(Record/play deck.)
3-digit display measures tape travel on record/play deck.
@
TAPE COUNTER
RESET button
Ss
<ARB1001>
Advertisement
