Advertisement
ANTENNA CONNECTION
Radio reception is not possible unless the antenna is properly
connected.
The strength of broadcast signals varies from one area to another {signal pro-
pagation is especially poor in metropolitan areas where there are many tall
buildings and in mountainous areas}. Proper antenna installation is vital to good
reception.
AM ANTENNA
The AM loop antenna supplied with the tuner should be connected to the AM
antenna terminals. The antenna should be placed at a distance from the tuner,
and should not be allowed to touch metallic objects. Avoid piacing it near CD
players, personal computers,
television sets, and other devices generating radio
frequencies.
Setting Up the AM Antenna
°
Fold out the supports on the bottom of the antenna. insert the stopper in the
hole in the antenna to lock them in place.
°
Place the antenna on a level surface and rotate it to locate the orientation
that yields the best reception.
AM Loop Antenna Set-up
Connect to AM antenna
terminals.
LS a
——
Ped
Stopper
AM
Loop Antenna Connection
The accessory AM loop antenna
must
be connected
to ensure
proper reception.
The accessory AM loop antenna
must be connected to ensure
proper reception,
(Only F-X552, F-X55ZL,
TX-885Z and TX-b552L}
{Only F-X33Z, F-X33ZL,
TX-3332 and TX-333ZL}
FM ANTENNA
FM T-type Antenna Attachment
Connect the accessory FM T-type antenna to the FM terminals. Stretch the
antenna out to its full length, and affix it to a wall, etc.
Stretch out both ends
Ped |
2,
is
|
|
ae)
See
x
Correct
Incorrect
(lol@ole
|
{Only F-X882Z, F-X56ZL,
TX-58Z and TX-585ZL)
{Only F-X33Z, F-X33ZL,
TX-333Z and TX-333ZL}
4
ARB1001>
EXTERNAL FM ANTENNA
INSTALLATION
Use an external antenna when the signals trom the station are weak and cannot
be picked up by the accessory T-type FM antenna, or when the sound heard is
accompanied by iarge amounts of noise.
There are iwo ways of cannecting the
external FM antenna to the ANTENNA terminals: with 300-ohm teeder wire, or
with a 75-chm coaxial cable.
it is recommended that you use the 75-ohm coaxial cable so that the effects of
extraneous noise are reduced to 2 minimum.
When the connecting cable
is a 75-ohm coaxial cable
75-ohm coaxial cable
with PAL connector
elo|@lo|o
75-ohm coaxial cable
without PAL connector
(Only F-X33Z, F-X33ZL,
iGnly Fx!
TX-3332 and TX-333ZL)
TX 852.
F X862L,
od TX-SREZU)
When the connecting cable is
a 300-ohm feeder wire
300-ohm feeder
Pa
Advertisement
