Danfoss BOCK FK20 Operating Manual page 2

About these instructions
Read these instructions before assembly and before using the compressor. This will avoid
misunderstandings and prevent damage. Improper assembly and use of the compressor can lead to
serious or fatal injury.
Observe the safety instructions contained in these instructions.
These instructions must be passed onto the end customer along with the unit in which the
compressor is installed.
The safety advice, which is contained in these instructions for assembly, and which is relevant for
regular operation and maintenance, must be forwarded by the manufacturer in his own documents
to the operator of the entire system. It must also be ensured, that personnel working in daily
operation with the compressor have access to important information such as safety and warning
advice about the compressor. Such persons must read the safety advice and have understood it.
Bock assumes no liability for any damage arising from non-compliance.
D
GB
F
I
TR
2 | AQ451838788471en-000201 © Danfoss | Climate Solutions | 2023.07