Decommissioning
11 Decommissioning
11.1 Remove the Inverter
1. Disconnect the inverter from DC Input, AC output, Smart Box and battery.
2. Wait for 5 minutes for de-energizing.
3. Disconnect communication and optional connection wires.
4. Remove the inverter from the wall bracket.
5. Remove the bracket if necessary.
11.2 Packaging
If possible, always pack the inverter in its original carton and secure it with tension
belts. If the original package is no longer available, you can also use an equivalent
carton that meets the following requirements;
Ÿ
Suitable for the weight of product.
Ÿ
Easy to carry.
Ÿ
Be capable of being closed completely
11.3 Storage and Transportation
Store the inverter in a dry environment where ambient temperature stays between
-13℉/-25°C ~ 167℉/75°C. Take care of the inverter during the storage and
transportation, keep less than 5 cartons in one stack.
11.4 Disposal of Inverter
Do not dispose of faulty inverters or accessories together with household
waste. Please accordance with the disposal regulations for electronic waste
which is applied at the installation site at that time.
74
12 Disclaimer
The inverters shall be transported, used and operated under restricted conditions.
Panasonic will not provide any service, technical support or compensation in case
of the following circumstances, including but not limited to:
The inverter is damaged by force majeure (such as earthquake, flooding,
Ÿ
thunderstorm, lighting, fire hazard, volcanic eruption, etc.);
The inverter's warranty is expired, but not extended;
Ÿ
The inverter's SN, warranty card or invoice cannot be provided;
Ÿ
The inverter is damaged by man-made cause;
Ÿ
The inverter is used or operated against any items in local policy;
Ÿ
The installation, configuration and commissioning of the inverter doesn't
Ÿ
meet the requirements mentioned in this manual;
The inverter is installed, refitted or operated in improper ways;
Ÿ
The inverter is installed, operated under improper environment or
Ÿ
electrical condition;
The inverter is changed, updated or disassembled on hardware or
Ÿ
software without authority from Panasonic;
The communication protocol from other illegal channels is used; and
Ÿ
The monitoring or control system is used without authority from
Ÿ
Panasonic.
Panasonic reserves the right for the final explanation.
Disclaimer
75