Before Working Inside Your Computer; Before You Begin; Safety Instructions - Dell 24-3475 Service Manual

Before working inside your
computer
NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.

Before you begin

1 Save and close all open files and exit all open applications.
2 Shut down your computer. Click Start →
NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down instructions.
3 Disconnect your computer and all attached devices from their electrical outlets.
4 Disconnect all attached network devices and peripherals, such as keyboard,
mouse, and monitor from your computer.
5 Remove any media card and optical disc from your computer, if applicable.
6 After the computer is unplugged, press and hold the power button for 5 seconds
to ground the system board.
CAUTION: Place the computer on a flat, soft, and clean surface to
avoid scratches on the display.
7 Place the computer face down.

Safety instructions

Use the following safety guidelines to protect your computer from potential damage
and ensure your personal safety.
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For more safety best
practices, see the Regulatory Compliance home page at
regulatory_compliance.
10
Power → Shut down.
www.dell.com/