Installing Heat Sink Fan - Dell OptiPlex XE3 Small Form Factor Service Manual
Hide thumbs
Also See for OptiPlex XE3 Small Form Factor:
- Service manual (70 pages) ,
- Service manual (80 pages)
Table of Contents
Advertisement
Installing heat sink fan
1
Place the heat sink fan on the heat sink [1].
2
Tighten the screws (4) to secure the heat sink fan over the heat sink [2].
NOTE:
Tighten the screws in a sequential order (1,2,3,4) as mentioned on the system board.
3
Connect the heat sink fan cable to the connector on the system board [3].
Disassembly and reassembly
39
Advertisement
Table of Contents
