Steps
1. Connect the battery cable to the connector on the battery.
2. Close the latch on the battery cable connector to secure it to the battery.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Touchpad
Removing the touchpad
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
3-cell battery
70
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
or
4-cell battery
(whichever applicable).
computer.
computer.