Table of Contents
Advertisement
eDP cable
Removing the eDP cable
CAUTION:
The information in this section is intended for authorized service technicians only.
NOTE:
This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
hinge
caps.
7. Remove the
display
bezel.
8. Remove the hinges.
9. Remove the
display
panel.
About this task
The following image indicates the location of the eDP cable and provides a visual representation of the removal procedure.
Before working inside your
computer.
Removing and installing Field Replaceable Units (FRUs)
113
Advertisement
Table of Contents
