Table of Contents
Advertisement
Steps
After performing the pre-requisites, you are left with the display cover and antenna assembly.
Power-adapter port
Removing the power-adapter port
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
display
assembly.
About this task
The following images indicate the location of the power-adapter port and provide a visual representation of the removal
procedure.
Before working inside your
computer.
Removing and installing Field Replaceable Units (FRUs)
119
Advertisement
Table of Contents
