Installing The Secure Digital Card; Base Cover; Removing The Base Cover - Dell NOT22397 Owner's Manual

Installing the Secure Digital card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Steps
Push the SD memory card out into its slot to insert it.
Next steps
1. Follow the procedure in

Base cover

Removing the base cover

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
About this task
NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
40 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.