Page 1
Online Support If you require assistance or are experiencing issues with your Spirit Unit, please contact customer care for additional help. 1-800-258-8511 questions@spiritfitness.com Warranty Registration Scan to quickly and easily register your new Spirit Fitness unit. PULL UP / CSD-PUDA...
Congratulations on your new unit, and welcome to the Spirit Fitness WARRANTY REGISTRATION family! Thank you for your purchase of this quality unit from Spirit Fitness. Your new unit was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available.
PRODUCT LABELS The following pages show examples of Spirit® Fitness warning labels and communication stickers placed on the equipment as part of the manufacturing process. It is critical that owners maintain the integrity and placement of these stickers. If you find any stickers miss- ing or damaged contact your local dealer or distributor for a replacement.
SAFETY INSTRUCTIONS Read the Owner’s Manual carefully before assembling, servicing or 16. DO NOT use dumbbells or other incremental weights, except those using the equipment. It is the responsibility of the facility owner and/ provided by the manufacturer . or owner of the equipment to instruct users on proper operation of the 17.
If unable to immediately replace worn or damaged components then remove from service until the repair is made. Use only Spirit Fitness supplied components to maintain/ repair the equipment. Keep a repair log of all maintenance activities. Inspect all cables and belts and connections prior to use.
PRECAUTIONS WARNING These safety notes are directed to you as the owner of the Strength Equipment manufactured by Spirit Fitness. Please train all your users and fitness staff to follow these safety • Your Strength Equipment manufactured by Spirit Fitness instructions.
SAFETY GUIDELINES AND PRACTICE Spirit Fitness recommends that all fitness equipment be used in a supervised area. It is recommended that the equipment be located in an access controlled area. Control is the responsibility of the owner. The extent of control is at the discretion of the owner.
APPROVED FOR USE WITH THE SPIRIT FITNESS • DO NOT use any equipment in any way other than designed EQUIPMENT WHICH APPEARS TO BE DAMAGED OR or intended by the manufacturer. It is imperative that SPIRIT WORN. FITNESS equipment is used properly to avoid injury. •...
CAUTION: Damage to the Strength Equipment during assembly is not covered as part of the limited Spirit Fitness warranty. Take care not to drop or lean the Strength Equipment on its side. Carefully stand the Strength Equipment up in the normal upright position on a stable surface so it will not tip over during assembly.
PARTS OF YOUR UNIT Pull Up Handles Accessory Tray 5lb Increment Weight Workout Diagrams Rep & Time Counter Dip Handles Guide Rods Kneed Pad Shroud Weight Stack Foot Steps Foot Steps...
ASSEMBLY STEP 1 Assembly Instructions Description Specifications Doorframe Inner Hexagon Socket Head Bolt M10*35 Spring washer Flat washer Φ20*Φ10.5*2 Main Frame Pedal Frame...
Page 14
ASSEMBLY - CONTINUED STEP 2 Assembly Instructions Description Specifications Seat Pad Socket Head Inner Hexagon Bolt M8*30 Spring Washer Flat Washer φ16*φ8.4*1.6...
Page 15
Spring Washer Flat Washer Φ20*Φ10.5*2 ASSEMBLY - CONTINUED Sliding Frame STEP 3 Assembly Instructions Description Specifications Left Parallel Bar Right Parallel Bar Socket Head Inner Hexagon Bolt M10*25 Socket Head Inner Hexagon Bolt M10*130 Socket Head Inner Hexagon Bolt M12*140 Spring Washer Flat Washer Φ20*Φ10.5*2...
Page 16
ASSEMBLY - CONTINUED Guide rod Guide rod fixed plate Rubber bumper φ64*φ32*φ20*35 Rubber bumper φ38*φ21*10 Rod end cover Selector pin Inner Hexagon Socket Head Bolt M8*20 Spring washer Flat washer Φ16*Φ8.4*1.6 10LB Weight Stack 10LB Weight Stack 10LB Weight Stack 10LB Top Weight Stack 17-Hole Weight Selector Spring Pin...
Page 17
M5*10 Cross recessed countersunk head screw Inner Hexagon Socket Head Bolt M6*16 Spring washer Flat washer Φ12*Φ6.4*1.6 ASSEMBLY - CONTINUED Assembly Instructions Description Specifications Upper shield Shield fixed plate Front shield Back shield M5*10 Cross recessed countersunk head screw Inner Hexagon Socket Head Bolt M6*16 Spring washer Flat washer...
Page 20
REPETITION AND TIME COUNTER A battery-operated (batteries not included) console is available for use on your equipment. The console tracks workout time and number of repetitions per set. REPS TIME RESET RESET Repetition Counter Time Counter This counter is powered by 2 pcs of AA batteries. (Alkaline Battery Recommended)
All preventive maintenance activities must be performed on a regular basis. Performing routine preventive maintenance actions can aid in providing safe, trouble-free operation of all SPIRIT equipment. SPIRIT is not responsible for performing regular inspection and maintenance actions for your machines. Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting and recording.
Effective September 13, 2023- CSD-PULL UP / DIP ASSIST LIMITED WARRANTY Spirit Fitness warrants the unit for a period of time listed below from the date of installation, as determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date. Spirit Fitness’ responsibilities include providing new or remanufactured parts, at Spirit Fitness’...
Page 25
5. Products that have been: sold, transferred, bartered, or given to a third party. 6. Products that do not have a warranty registration on file at Spirit Fitness. Spirit Fitness reserves the right to request proof of purchase if no warranty record exists for the product.
Page 26
3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107. 4. Spirit Fitness’ obligation under this warranty is limited to repairing or replacing, at Spirit Fitness’ option, the product through one of our authorized service centers.
TROUBLESHOOTING Service Checklist Diagnosis Guide Problem Solution/ Cause Rep Counter & Timer does not turn on when Replace batteries. Check the magnet is still in position and the reed switch is still positioned next to the weight is lifted ...
Need help?
Do you have a question about the CSD-PUDA and is the answer not in the manual?
Questions and answers