Subscribe to Our Youtube Channel
Related Manuals for Atrix JR8BPV
Summary of Contents for Atrix JR8BPV
- Page 1 JET RED BACKPACK VACUUM OWNER’S MANUAL Model: JR8BPV 120V 12A, 1400W ETL US Canada Atrix 1350 Larc Industrial Blvd. Burnsville, MN 55337 www.atrix.com sales@atrix.com Telephone: 952.894.6154 Toll Free Telephone: 800.222.6154 Fax: 952.894.6256...
-
Page 2: Important Safety Instructions
5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return to Atrix International. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges of corners. - Page 3 11. Do not pick up anything that is burning or smoking such as cigarettes, matches or hot ashes. 12. Do not use without filter in place. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 15.
- Page 4 GET TO KNOW YOUR ERGO BACKPACK VACUUM Furniture Nozzle (BP40) Air Driven Turbo Brush (BP44) Mini Turbo Brush (JRMTB) Floor Tool (BP43-1) 3-in-1 Multi-Surface Tool (JR31) Extension Wand, 22”-37” (BP39) Hose (JRBPH) Filter Bags (VACBPFB) 9. Shakeout Bag (VACBP8) 10. & 11. Premotor and Exhaust Filter Set (BPFILPACK) 12.
- Page 5 OPERATING INSTRUCTIONS Warning: To reduce the risk of electric shock, the power cord must be disconnected before removing the dust bag, shake-out bag, changing the filters or performing maintenance or trouble-shooting checks. Important: Do NOT use the vacuum without all filters, shake-out bag, and HEPA dust bag in place.
- Page 6 2. To extend the length, push forward on the plastic button and pull the inner tube outward to extend for a longer reach. Manual Suction Control Your vacuum cleaner includes a manual variable suction control on the flexible hose handle. The suction power can be adjusted by moving the suction regulator to the desired position between open and closed.
- Page 7 2. Step on the floor to carpet selector to adjust the height of the brushes. There are two different heights. The tool allows you to retract the bristle brushes when being used on the carpet or rugs, and extend when being used on wood or tile surfaces.
- Page 8 4. To attach the air driven turbo brush, insert the telescopic tube into the air driven turbo brush. 5. To adjust the suction control on the air driven turbo brush, slide the suction control for more or less as desired. Using Your Vacuum 1.
- Page 9 2. Pull the tab on the HEPA bag holder out slightly and flip upwards. (Fig. 2) 3. Holding the HEPA bag in your hand, slide/pull it out of the bag holder and dispose. 4. Insert/slide new bag. Cardboard face should rest securely in the bag cover guides.
- Page 10 1. Remove the shake-out bag from the canister. The HEPA pre-motor filter is located underneath the shake-out bag. To remove the HEPA pre-motor filter, place your index finger underneath the edge of the premotor filter, and using your thumb press the tab toward the center of the filter to release, then lift the side of the HEPA pre-motor filter and pull upwards on filter.
- Page 11 2. Remove the exhaust filter. As necessary, hand wash or replace the cloth filter with tap water and let dry before reinserting it. (Fig. 6) How to properly use the cord relief:...
-
Page 12: Warranty Information
(1) year from the date of purchase. Should any failure to conform to this warranty appear within this period, Atrix will, at its option, repair or replace the defective product. It is the user’s responsibility to return the product, freight prepaid, to Atrix...
Need help?
Do you have a question about the JR8BPV and is the answer not in the manual?
Questions and answers