Related Manuals for Atrix CYCLONIC TURBO VACUUM CLEANER
Summary of Contents for Atrix CYCLONIC TURBO VACUUM CLEANER
- Page 1 Atrix CYCLONIC TURBO VACUUM CLEANER USER GUIDE Type Parameter Canister 110V~ 60Hz 1400W, 12Amps Atrix International, Inc. 1350 Larc Industrial Blvd. Burnsville, MN 55337 www.atrix.com sales@atrix.com 952.894.6154 - 1 -...
-
Page 2: Important Safety Instructions
5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to Atrix International. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges of corners. - Page 3 COMPONENTS AND EQUIPMENT 1. Floor Nozzle 2. Telescopic Tube 3. Parking Fixture 4. Storage Clip 5. Air Slide 6. Suction Hose 7. Suction Hose Connection 8. Carrying Handle 9. Dust Release Button 10. Dust Container 11. ON/OFF Button 12. Cord Rewinder Button 13.
- Page 4 PREVENTION Turn off the vacuum cleaner immediately if the air intake, attachment or telescopic tube becomes blocked. Before starting the vacuum cleaner up again remove the item (s) causing the blockage: 1. Never use the vacuum cleaner in the immediate vicinity of hot items and do not suck up hot objects, such as cigarettes or ashes.
- Page 5 PREPARING THE VACUUM CLEANER 1. Fit the hose on the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection and pull it out.
- Page 6 For furniture, curtains, drapes, etc. Vacuum cleaning 1:Before using the device, first pull out a sufficient length of power cord and plug into outlet. The yellow mark on the power cord is the maximum length that must not be exceeded. To switch on the device press the foot pedal button on the casing with your foot 2:To rewind the power cord, press the button...
-
Page 7: Transport And Storage
Cleaning the motor filter 1. Turn off and unplug cleaner. 2. Remove the dust container. 3. Release the filter cover and remove it. 4. Hold the protective motor filter together with the holder over a dustbin. Only then should you separate both parts from each other. - Page 8 Atrix Cyclonic TURBO Vacuum Limited Warranty: To the original user purchasing the Atrix Cyclonic TURBO Vacuum, Atrix warrants that the vacuum will be free of defects in material and manufacture for a period of one (1) year from the date of purchase. Should any failure to conform to this warranty appear within this period, Atrix will, at its option, repair or replace the defective product.
Need help?
Do you have a question about the CYCLONIC TURBO VACUUM CLEANER and is the answer not in the manual?
Questions and answers