Download Print this page
Dakota Digital Odyssey ODYR-19-7 Operation

Dakota Digital Odyssey ODYR-19-7 Operation

Dual, triple, or quad air pressure gauge

Advertisement

Quick Links

DUAL, TRIPLE, or QUAD AIR PRESSURE GAUGE
BIM MODULE
CONNECTOR
BIM-xx-2 POWER/DATA harness
BIM-19-2
setup/status switch
ODYR-19-7 & SLX-19-7
BLACK
GRAY
RED
BLACK ground for gauge
WHITE warning output (-)
BLUE night dimming input (+)
RED +12V key on power
(fused 5 - 20 AMP max)
RED +12V key on power
(fused 5 - 20 AMP max)
MAN# 650447:A
Left Front pressure sensor
Right Front pressure sensor
Right Rear pressure sensor
Left Rear pressure sensor
Tank pressure sensor

Advertisement

loading

Summary of Contents for Dakota Digital Odyssey ODYR-19-7

  • Page 1 ODYR-19-7 & SLX-19-7 DUAL, TRIPLE, or QUAD AIR PRESSURE GAUGE BLACK GRAY BLACK ground for gauge BIM MODULE CONNECTOR WHITE warning output (-) BLUE night dimming input (+) BIM-xx-2 POWER/DATA harness RED +12V key on power (fused 5 - 20 AMP max) RED +12V key on power (fused 5 - 20 AMP max) Left Front pressure sensor...
  • Page 2 For higher current buzzers or lights, a relay will need to be used to switch the indicator on. Dakota Digital’s RLY-1 30A relay may be used for this. One of the coil wires should be connected to 12 volts and the other coil wire connected to the WHITE wire. When the gauge is outside its limits, the relay will turn on.
  • Page 3 Setting the warning limit: The low and high warning limits can be set to different values for each sensor. The push button switch on the front of the display is used for setting the warning limit. The procedure for setting the warning limit is as follows: 1.
  • Page 4: Troubleshooting Guide

    Troubleshooting guide. Additional troubleshooting tips on the BIM-19-2 can be found in its separate manual. Problem Possible cause Solution Gauge will not light up Red wire does not have Connect to a location that has power. power. BLACK wire is not getting Connect ground to a different location.
  • Page 5: Service And Repair

    Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the sale of this product.

This manual is also suitable for:

Odyssey slx-19-7