Table of Contents
Advertisement
19.
Remove the back latches by inserting a screw driver
blade between the case and the spring. Then sl ide the
latdt and spring toward the bottom of the case.
20.
To assist in reassembly, mark the tube guides. Then
remove the right and left guides (left guide not shown).
SERVICE MANUAL
NO.
5510·A
21. Loosen the three focusing collar screws and lift out
the focus tube
assembly.
22.
Re.
m ove the four front plate screws (arrows) and the
front plate.
23. To di sassemble the back, remove the two pressure
pad rivets (arrows)
.
(Refer to Parts List No. 5510)
.
7
Advertisement
Table of Contents
