Kodak Chevron Camera - Kodak CHEVRON Service Manual

KODAK CHEVRON CAMERA
13 .. Remove the two bearing plate screws, washers, and
the bear ing plate (with late style key assembly it wi II be
necessary to remove the wind post nut to lift out the
bearing plate).
14. Remove the winding lever spring (arrow 1), the key
post screw and washer (arrow 2) and the ratchets (arrow
3) ( later style keys have a nut on key post). Remove the
key post, the clutch spring and the clutch sleeve.
15.
Remove the back frame screws and the back frame.
To assist in reassembly, note the location and number of
washers under the back frame.
6
16. Remove the metering clutch assembly retainer ring and
lift off the clutch assembly, located on the top of the cam-
era.
17.
Hold the metering roller assembly with tool No. 88l.
Using tool No. 576, turn the pinion clockwise to remove it.
This is a left-hand thread.
18.
Remove the screws in the roller bracket and lift off
the bracket and fi 1m roller.