Kodak CHEVRON Service Manual page 10

KODAK CHEVRON CAMERA
34. Replace the film stop pawls. If the pawls are defec-
tive, replace them with a late style single lever and new
spring (see Parts list No. 5510).
35. Replace the top pawl spring.
36. Replace the bottom pawl spring (refer to Parts list
No. 5510 if late style spring and single lever are used).
10
37. Replace the metering ratchet assembly and assembly
screw (arrow 1), the hold-back pawl spring (arrow 2), and
the washer (arrow 3).
38. Replace the hold-bock pawl (arrow 1), and the adj usting
nut and screw (arrow 2). Then hook the short leg of the
spring on the hold-bock pawl lug (arrow 3), and the long
legof the spring on the metering lever assembly (arrow 4) .
.
~
. \ . ~ " " .
f . ,
~...;
:
.
39. Replace the eccentric lock lever and lever screw.