Kodak CHEVRON Service Manual page 5

7. Remove the mirror adjusting screw (arrow
1),
using tool
No. 262, and lift off the mirror, the mirror clip (arrow 2),
the movable mirror bracket spring (arrow 3), and the brack·
et spring (arrow 3), and the bracket assembly (arrow 4).
8. Remove the stationary mirror bracket screws and the
bracket.
9. Remove the range finder adjusting mask assembly
(arrow
1).
Remove the movable mirror bracket pivot (arrow
2) with a 3/ 8" hexagonal nut driver.
SERVICE MANUAL NO, 5510·A
4
3
10.
Remove the metering pawl retainer ring (arrow
1),
the
spring (arrow 2), the pawl (arrow 3), and the eccentric
locking lever screw and lever (arrow 4).
11.
Remove the upper and lower fi 1m stop pawl springs
(arrow
1),
the screw, and the pawls (later style cameras
have single pawl and spring). Remove the metering lever
assembly screw (arrow 2) and the lever. Remove the hold
back pawl screw (arrow 3), the eccentric nut, pawl, washer,
spring, and the metering ratchet assembly screw (arrow 4)
and the assembly.
12.
Remove the metering sleeve stud (arrow
1)
with a
3/ 16"
hexagonal nut driver. Remove the winding keyas.
sembly screws and the assembly (arrow 2).
5