EzCAP ezcap241 Quick Start Manual

Playback:
ezcap
REMOTE CONTROLLER
Music Digitizer
Quick Start Guide
The device with playback function so you can easily checking the recorded file.
At standby mode, press playback button, device will start to play the recording music, the
indicator will be slow flashing. Press playback button again, will stop playback and back to
standby mode. During playback, use up/down button to choose play previous
or
next file. Use
volume up down button to set volume up and down.
You can also copy other MP3
files
to
USB drive and plug to our device to play them, but only files
in "TAPEMP3" folder can be played.
-
*
O
Of©
o o
o o
Press to record, again to stop.
Press to playback, again to
pause.
Thanks for purchasing ezcap241 Music Digitizer. The following guides you how to set
up.
Hope this device will bring you nice digital experience.
Previous and next
o o
With ezcap241 music digitizer, you can easily convert your old analog music to MP3, and
save into USB drive or SD card without computer, and it can automatic partition each songs
of all the music.
Notice: Please use
the power adapter in the package directly. Powered by USB port of
your computer may cause the interference of noise.
Volume down and up
Features
Recording
Stand atone, no computer required
Automatic partition.
the
reco>
con
m
Features:
nect audio source to line in with 3.5mm cable, Power on ezcap241 with 5V DC power adapter,
or RCA cable, you can plug a earphone to the line out port to listen the input audio.
With remote control, can get all the functions by it.
1
.
POWER
- Supply 5V DV power with MINI USB
power.
Plug a USB drive or SD card (don't do it at same time), make
sure they are FAT32 (FAT) or
exFAT format (not support NTFS).
Better to format
the storage before using on ezcap241, and keep the storage near to empty,
otherwise will cause recording error.
Now ezcap241 is under standby mode (green indicator keep on), and the
color of indicator is
green shows it
at
default manually mode. Just simply press the recording button of the box, or
button of remote controller, then the device will start to recording (converting) the playing music
to MP3 format, the green indicator will be quick flashing (if not, means not recording, re-plug
your
USB flash and try again)
.
Press the recording button again to stop recording and save a MP3 file
in USB drive.
Mini USB power.
O
STORAGE
CT
o-crÿ
\Z7 With 3.5mm and 2 RCA audio input selections.
2. SD card slot
-
Plug SD card saving record file.
[二
POWER
Package Contents
3. USB OTG
-
Plug USB drive saving record file.
匿
4.
LINE OUT - Connect to speaker or earphone,
monitor the playing
music.
ezcap
Specification
5. LINE IN - Use 3.5mm audio cable connect with
audio source (phones, cassette players... etc.)
ruSBdriverSDÿard
3.5mm audio, 2 RCA L/R audio
Storage
Media
At the interval between two songs where you want to save in another file, short press NEXT
button of remote controller, the flashing green indicator will be off about 2 seconds, then
quick
flash again to save in another file.
Device will create a
new
folder
name "TAPEMP3" in your USB drive, and save each MP3 name
"FV0001 to FV9999".
If you want do it at auto mode, simple at standby mode long press NEXT button 3~5 seconds, till
you see the indicator from green to blue.
At auto mode, ezcap241 will detect each
interval between two songs, and will save them in two
files.
If you
want to
switch back to manual mode from auto mode, stop recording(or playback) to
standby mode (blue indicator keeps
on), long press NEXT button 3-5 seconds, till you see the
indicator from blue to green, or simply power off ezcap241, then power on again, it will load at
default
----
manually mode
.
Note: For better recording, (also for better division in auto mode), please turn the volume
of music source to bigger enough.
Audio input
r 6. RCA INPUT -Use RCA cable connect with
audio
source (LP player, DVD player, Set top
box... etc.)
Audio Output
Converter Format MP3
flIUliC DIGITIZER
128Kbps
Recor
status
Bit Rate
7. IR receiver
d button, IR remote control, LED for working
User Interface
8. LED
Green LED (manually mode)
Keep on— Standby
Quick
flash
—
-
Recording
Slow flash— Playback
66(L)x62(W)x23(H)mm
"""
Dimensions
Net Weight 52g
©
Mini USB power supply (5V DC adapter) Power supply
(O
Note: Please do not fast and continuous press the button of remote controller, otherwise
will cause it fault.
You can download the Audacity audio editing software to edit your recorded files. Please go to
the link
-
http://audacitv.sourceforqe.net/download/ to download and get the more information for
Audacity software functions.
Switch to Automatic
mode, LED change to
Blue,
The status will be same as above.
9 RECORD BUTTON
-
Press to record, press again to stop.
3
2