EzCAP 293P Quick Start Manual

Tape Camcorder HD Digitizer
Thanks for purchasing ezcap293P Tape Camcorder HD digitizer. The following guides you how to set
it up. Hope this device will bring you nice digital experience.
Turn your analog HD camcorder to digital, with this ezcap293P Tape Camcorder HD digitizer, you can
easily digitalized the storage of your old HD Camcorder from cassette to Micro SD card. It with HDMI
input and AV input, can support up to 1080P video recording.
Features/ports and buttons:
1. Battery container --- To power
supply by plug in P970 7.2V
battery.
2. The screw socket --- For holding
ezcap293P to FLASH LAMP
HOLDER of HD Camcorder with
"6" the holder together.
3. HDMI OUT—HDMI output, pass
through display HDMI
4. HDMI IN—HDMI input
from HD Camcorder
5. Micro SD slot --- Input Micro SD
card to save recorded video.
6. Screw socket --- For assembling
the Digitizer and Camera together.
7. AV IN --- CVBS input from Camcorder.
Button and LED:
REC button --- Press to record, again to
stop
REC LED --- Flash when recording.
Battery life LED --- Be off if with
enough battery, be flash when less
about 10%, be keep on less about 1%
Micro SD card LED --- Be off if with enough space, be flash when less about 10%, be keep on
when less about 1%
How to use:
Quick Start Guide