Troubleshooting - Black & Decker BDUR1 Instruction Manual

TROUBLESHOOTING

Review this table to find do-it-yourself solutions for minor performance
problems. Any other serivce needed should be performed by other qualified
service agent.
WARNING: Always turn off and unplug vacuum before performing
maintenance to the appliance. Failure to do so could result in electrical shock
or perosonal injury.
VACUUM DOES NOT POWER ON
CAUSE
1. Unplugged at wall outlet.
2. Tripped circuit breaker/blown fuse at
household service panel.
WEAK SUCTION
CAUSE
1. Full or clogged dust bin.
2. Clogged airflow passages.
3. Dirty filters.
4. Dust bin open.
5. Broken drive belt.
Questions? Contact Customer Service
Phone: 855-454-8078
SOLUTION
1. Plug in firmly, push ON/OFF button.
2. Reset circuit breaker or replace fuse.
SOLUTION
1. Empty dust bin.
2. Clear airflow passages.
3. Change/Clean filters.
4. Close hood until release button is latched.
5. Replace belt.
20