Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker AIRSWIVEL BDASP100 Series
Summary of Contents for Black & Decker AIRSWIVEL BDASP100 Series
- Page 1 BDASP100 Series BDASP200 Series If you have a question or experience a problem with your BLACK+DECKER purchase, call 1-800-524-6716 from 9 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent. Please have the model number available when you call.
-
Page 2: Important Safety Instruction
IMPORTANT SAFETY INSTRUCTION SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. - Page 3 DO turn off controls before you connect or DO NOT use the vacuum cleaner with blocked filters. Clean or replace filters disconnect the appliance to or from before continuing. (refer to User the mains supply. Maintenance section). DO disconnect the appliance from the DO NOT use the vacuum cleaner if the power supply when not in use, before appliance malfunctions, abnormal...
-
Page 4: Transporting Your Vacuum
IMPORTANT SAFETY INSTRUCTION CONT. READ AND SAVE THESE INSTRUCTIONS Symbols • The label on your tool may include the following symbols. The symbols and their definitions are as follows: V ....volts A .....amperes Hz ....hertz W ....watts min ....minutes or AC ..alternating current or DC ..direct current n o ....no load speed ....Class I Construction... -
Page 5: Product View
Product View 1. Handle 8. Wheel 9. Connecting hose 2. Dust cup release 3. Dust cup 10. 2-in-1 crevice tool accessory 4. Handle hose 11. Power cord 5. Power on/off 12. Power cord wrap 6. Nozzle 13. Turbo Pet Tool accessory 7. - Page 6 Assembly Please Note: Always remove the plug from the power socket before fitting or removing accessories. Ensure all Filters are fitted, and fitted correctly before using. WARNING: DO NOT plug in your vacuum cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operation procedures.
-
Page 7: Operation
Operation Twist the quick release cord hook to Step on the brush cover and pull back on release the power cord. handle, to engage for operation. Plug in your machine and push ON/OFF To maintain optimal performance,please button to switch ON/OFF. emtpy dust cup when debris reaches MAX FILL line. - Page 8 Operation The handle hose can be used immediately. At the same time, you can insert the 2-in-1 crevice tool / turbo pet tool into the hose handle to extend the distance. Accessories The 2-in-1 crevice tool with brush allows for vacuuming in narrow and hard-to-reach places.
- Page 9 Maintenance And Care - Emptying WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Emptying and cleaning the dust cup Press dust cup release Hold dust cup over garbage Close the base of the dust button to remove the dust bin and unclip the lock on the cup, align the cup base back...
- Page 10 Maintenance And Care - Cleaning Exhaust Filter Locate and unlock filter cover as shown. Push left to un-lock, right to lock. filter cover filter Remove filter cover with filter. Wash with water every 3 months, allow at Wipe with cloth over garbage bin, least 24 hours to dry and make sure it is dry removing dirt and debris.
- Page 11 Maintenance And Care - Cleaning Dust Cup Filter 5. Hand wash the foam 6. Allow filter to dry 24 7. Twist filter assembly filter. hours before putting counterclockwise back into vacuum to remove for cleaning cleaner. dirt and debris from the filter assembly as needed.
- Page 12 Maintenance And Care - Cleaning Vacuum And Tools Do not clean the vacuum cleaner, components or accessories using petrol or any other flammable liquid or solvents, etc. Clean only the outside of the vacuum cleaner. Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and accessories.
- Page 13 Maintenance And Care - Replace Brush Roll WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. You should check your cleaner’s brush roll and drive belt regularly for wear or damage. You should also clean the brush and brush ends by removing string, hair and carpet fibers.
- Page 14 Maintenance And Care - Replace Drive Belt WARNING: Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner. Check the drive belt carefully for wear, cuts and stressed areas. If the drive belt appears worn, you will need to replace it. To remove the drive belt, read the instructions and follow the drawings below: 1.
-
Page 15: Troubleshooting
Troubleshooting WARNING: To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting to the vacuum cleaner. Vacuum cleaner won’t run: Possible causes Remedies 1. Vacuum cleaner is not plugged in 1. -
Page 16: One-Year Limited Warranty
WARRANTY ONE-YEAR LIMITED exchanges. WARRANTY The second option is to take or send the warranties product (prepaid) to a MIDEA this product to be free from defects in authorized service agent for repair or material or workmanship for a period of replacement at MIDEA’s option.