CORdLeSS HANd vAC INSTRUCTION MANUAL CATALOg NUMBeRS BdH1800PL BdH2000PL 20v MAX* Thank you for choosing Black+decker! To register your new product, 1-800-544-6986 or visit call www.Blackanddecker.com/NewOwner PLeASe ReAd BefORe ReTURNINg THIS PROdUCT fOR ANy ReASON. If you have a question or experience a problem with your Black+decker purchase, go to http://www.blackanddecker.com/instantanswers...
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially haz a rd o us situation which, if not avoided, may result in minor or mod er ate injury.
with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte for Lithium Ion batteries is composed of a mixture of liquid organic carbonates and lithium salts. WARNING: Do not look into the air vents when the unit is switched on, as sometimes there is a possibility of small debris being discharged from the air vents, especially after cleaning / replacement of the filters as debris inside the unit can be disturbed. • The charger supplied with this product is intended to be plugged in such that it is correctly orientated in a vertical or floor mount position.
PRODUCT FEATURES 1. On/off switch 2. Pivot lock button 3. Charging indicator 4. Dust collector 5. Bowl release button 6. Crevice tool 7. Brush tool 8. Dust bowl door 9. Dust bowl door release 10. Removable dust bowl 11. Charging base ASSEMBLY ADjUSTING THE DUST COLLECTOR (FIG. A - C) The dust collector (4) has a brush (7) that can be folded forward for dusting and upholstery cleaning.
TO CHARGE THE APPLIANCE: • Make sure the appliance is switched off. The battery will not be charged with the on/ off On/Off switch (1) in the On position. • Plug the charging base (11) into a standard 120 Volt 60 Hz electrical outlet. • Lower the appliance onto the charging base. The blue LED (3) in the base of the appliance will illuminate to indicate that it is charging. • When charging is complete, the LED will turn off. • The charger may become warm during charging. This is normal and does not indicate a problem.
• If necessary, wash the two filters (12 and 13) in warm, soapy water. • Make sure that the filters are dry before refitting them to the appliance. • Refit the pleated filter into the plastic pre-filter. • Refit the pre-filter into the dust container (10) until it locks into place. • Close the transparent door and make sure it clicks into place. Refit to appliance.
MAINTENANCE Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse the main body of the appliance into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts. Troubleshooting Problem Possible Cause Possible Solution • Unit will not start. • Battery not charged. • Check battery charging requirements. • Battery will not charge. • Charger not plugged in. • Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.
RBRC™ in cooperation with Black+Decker and other battery users, has established programs in the United States to facilitate the collection of spent LI-ION batteries. Help protect our environment and conserve natural resources by returning the spent LI-ION battery to an authorized Black+Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery. RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to...
failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than Black+Decker and its Authorized Service Centers. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer).Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to take or send the product (prepaid) to a Black+Decker owned or authorized Service Center for repair or replacement at Black+Decker’s option. Proof of purchase may be required.