HIKVISION DS-E00HGHI-B Series User Manual page 12

For the device with sticker
●
parts! Do not touch. Burned fingers when handling the parts. Wait one-half hour after switching
off before handling the parts.
If the device needs to be installed on the wall or ceiling,
●
1. Install the device according to the instructions in this manual.
2. To prevent injury, this device must be securely attached to the installation surface in
accordance with the installation instructions.
Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power
●
adapters may decrease.
Make sure that the power has been disconnected before you wire, install, or disassemble the
●
device.
If the device needs to be wired by yourself, select the corresponding wire to supply power
●
according to the electric parameters labeled on the device. Strip off wire with a standard wire
stripper at corresponding position. To avoid serious consequences, the length of stripped wire
shall be appropriate, and conductors shall not be exposed.
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
●
power cable, and contact the service center.
Digital Video Recorder User Manual
or , pay attention to the following cautions: CAUTION: Hot
xi