Advertisement
CLD-S360, CLD-S260
PLUG THE POWER CORDS INTO AC OUTLET
Plug the AC power cords of the player, stereo amplifier and TV set into an AC outlet.
When the power cord of this unit is connected to an AC outlet, power is supplied to the
unit's internal memory (such as the last memory) even when the POWER switch is off
(STANDBY). Therefore, be sure to connect the power cord directly to a wall outlet. If the
power cord is connected to an outlet such as a switched outlet on an amplifier, the various
memory contents will be erased whenever the amplifier's power switch is turned off.
NOTE:
Optional RF modulator (JA-RF3L) is
sold in the U.S. and Canada only.
CONNECTING TV AND STEREO AMPLIFIER
e@ Connect the VIDEO OUT jack of the player to the video
input jack of the monitor television.
e@ Connect the AUDIO OUT jacks to the stereo amplifier AUX,
CD, LD, VDP or other jacks, except the PHONO input jacks.
The television speakers can also be used by connecting the
USING TELEVISION WITHOUT AUDIO AND VIDEO
JACKS
UHF
television
VHF
television
antenna
antenna
television audio input jacks and the player AUDIO OUT jacks,
however connection to a stereo amplifier is recommended
to obtain superior audio playback quality for Compact Discs
and LaserDiscs.
:
Do not change the television antenna and VCR connections.
RF modulator
. Detach the VHF antenna cable from the VHF antenna terminal
of your TV set, and connect the cable to the VHF |N terminal of
the RF modulator JA-RF3L.
. Connect the VHF OUT terminal of the RF modulator to the VHF
antenna terminal of your TV set.
. Connect the socket (3-pin) of the RF modulator to the VHF
ADAPTER OUTPUT jacks.
CLD-S360
npnoocecs
oocoog
ommom
@e
71
Advertisement
