Advertisement
LD-S360, CLD-S260
@ PLAYER OPERATION IN THE TEST MODE
Operate the player by selecting a test mode function with the keys on the player or on the remote control unit.
« CD PLAYBACK
@ Place the CD disc on the turn table.
@ Press the PLAY (> ) key once.
(Twin gear starts to move.)
@® Push the cam plate (Fig. 4) in the direction of the
arrow and wait until the CD disc is clamped.
Turn table
Cam plate
Fig. 4
@ Press the [<4] or [>> | keys to appear "S-CD"
on the TV screen display.
MODEO0:00
TV screen display
® Press the PLAY (> ) key twice, disc will be
normally playbacked.
46
¢ LD PLAYBACK
@ Place the LD disc on the turn table.
@ Press the PLAY (> ) key once. (Twin gear starts to
move.)
® Press the SKIP REV ( 4 ) key to raise the tum
table (spindle motor section) while pressing the
cam plate (Fig. 4) in the direction of the arrow.
Raise it to the position where the LD disc can be
easily placed on the turn table.
If the turn table is raised too high, lower it with
the SKIP FWD ( )} ) key.
@ Place the LD disc on the turn table and press the
PLAY (> ) key once to clamp the disc.
© Press the [44] or
keys to appear
"S-LD" on the TV screen display.
MODEOO:00
TV screen display
© Press the PLAY (> ) key twice, disc will be
normally playbacked.
Advertisement
