One Time Vcr Setup (On-Screen Language, Channel Memory, Clock Set). 12 - Panasonic Omnivision PV-8450 Operating Instructions Manual

One Time VCR Setup
^Important: If the remote control POWER, ACTION, PROG, CHA/V, INDEX, or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
When the VCR is turned on for the first time, it automatically enters the setup mode.
Setup includes the following:
• Choose the language for on-screen menus and messages.
• Tell the VCR how your equipment is hookup (pages 6-9) so the VCR can correctly place channels into memory.
• Get ttie VCR ready for clock set.
3 2
3 #
4
Using
AT^ ►
keys
Whenever a menu or program
screen is displayed, the PLAY,
STOP. REWIND, and FF buttons
on the remote control function
as AWM only. For play, stop, rewind, and fast
forward functions, use the buttons on the VCR.
To Set the Language, Channels,
and Auto Clock
1
Turn the TV and VCR on.*
2
Tune your TV to the VCR output channel
(the same one you set on the back of the VCR: CH3 or CH4).
• If you used audio/video jack connection, tune the TV to its
video input.
3
Press CH
A
for English
on-screen displays.
Or, press CH
V
for Spanish
on-screen displays.
Or, press VCR/TV for French
on-screen displays.
SELECT LANGUAGE
j
PUSH VCR CH A: ENGLISH
OPRIMIR VCR CH ViESPANOL
APP. VCR/TV : FRANCAIS
• You can also set the language using the buttons on the VCR.
• If wrong language is set, see the "Reset all VCR Memory
Functions" section on page 5.
• The VCR should be connected to an antenna or cable
box (page 6-9).
4
Press CH
A
to start Channel
Auto Set and Clock Auto Set.
• The following messages appear:
"CH AUTO SET PROCEEDING"
"AUTO CLOCK SET PROCEEDING".
OIANNEL/CLOCX AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX. TUNE I T TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
or
1/ 4/2000 TUE 12:OOPH
DST;ON
SETTING : CH 02
AUTO CLOCK SET
AUTO CLOCK SET
IS INCOMPLETE
COMPLETED
PUSH ACTION TO SET CLOCK
END : PUSH CH UP KEY
• If you are using the CABLE/DSS BOX ►VCR ►TV connection method,
only the cable box output channel will be placed in memory.