Panasonic Omnivision PV-8450 Operating Instructions Manual page 24

Hide thumbs Also See for Omnivision PV-8450:
Table of Contents

Advertisement

Tape Operation
(continued)
*lmportant:
If the remote control POWER, ACTION, PROG, CHA/V, INDEX, or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
VMS Index Search System
Each time you start a recording, an invisible index mark is placed on the tape. When timer recordings are
made, program index and program information (see Time Stamp Feature" on page 21) are also included.
You can then use these index marks to access or scan your recordings.
FAST FORWARD
4
Direct Access
(For normal and/or timer recordings)
This feature allows you to go directly to the recording you want from
anywhere on the tape by entering the appropriate index number.
1
Press INDEX* to display the
"SELECT SEARCH MODE" screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step 3.
SELECT SEARCH MODE
L-JDEX SEAR^
PROGRAM INDEX SEARCH
SELECT:* ▼ KEY
SET
:► KEY
END
;INDEX KEY
2
Press
to select "INDEX
SEARCH," and then press ^
to display the "INDEX" screen.
3
Press a NUMBERED key to
select the desired recording.
INDEX
IW)EX
04
• To calculate the number, see below.
4
Press REW or FF to start a reverse
or fonward search.
INDEX SEARCH 04
• When the designated location is reached,
the VCR goes into Playback mode.
To calculate the Index Number
Count forward or backward each recording starting point, including
the recording you want to see, from wherever you are on the tape.
Example 1:
If you are watching recording 4 and you want to watch recording 2, count the
start points to number 2. The total is 3. Enter 3 in step "3" and press REW.
Example 2:
If you are watching recording 2 and you want to watch recording 6, count
the start points to number 6. The total is 4. Enter 4 in step "3" and press FF.
NOTE: i indicates start points of each recording.
Make each entry within 10 seconds, or the Index Search mode will be canceled.
Index marks will be placed for Timer recordings as well.
If the Direct Access index search is initiated extremely close to an index mark, the index mark may not
be counted in the search.
In the Program Index Search, this VCR can be memorized 8 programs in order of recording. If over 8
programs, the first program will be deleted and the new program will be listed.
24

Advertisement

Table of Contents
loading

Table of Contents