One Time Vcr Setup (On-Screen Language, Channel, Memory, Clock, Set) - Panasonic Omnivision VCRplus+ PV-4611 Operating Instructions Manual

b One Time VCR Setup
When the VCR i s first t don,
the language select dnd channel auto Set
To Set Language,
Channels,
and
Clock
screen appear automatically followed by P dne
a prompt to set the clock.
QD. O . Turn TV on and VCR on.
D
(A check list before you begin. |
LJ. All TV and VOR connections are made. DY is set to VCR channel (the Same one you set
O g; paa [aru
O: l dol S PUSH VCR CH a: ENGLISH
LCH / plays. PULSE VCA CH Y: ESPAÑOL
p
qd cud or
APP.
VCR/ TV : FRANCAIS
| e j Spanish on-screen If you set the wrong
VCR/IV VERCH | v , displays. language,
Up/Down
MAP:
see the "Reset all VCR
or Memory Functions"
Í EA -i Push VCR/TV for section on page 5.
VAM | French on-screen « You cán also set by
Q . displays. using the same
buttons on the VCR.
Make sure the VCR is connected
to an antenna or cable.
If you use a cable box, the cable box
must be left on for auto channel set.
l T : Push VCR CH A to
Al - start Channel Auto Set.
' * The following on-screen displays appear in sequence:
t - . *CH AUTO SET COMPLETED"
"PLEASE SET CLOCK BY PUSHING MENU KEY"
* .— A Push MENU to display
; O the SET CLOCK screen.
©
| í : T
» ..-- -+ + Make entries within 5 BY ROTATING WHEEL
minutes, or the VCR exits -PUSH WHEEL?
the Set Clock screen. TO ENO PUSH MENU KEY
G6 9:09
' Rotate and push
_ the WHEEL to
| . select and set the
+ MONTH. BY ROTATING WHEEL
:PUSH WHEEL
TO END PUSH MENU KEY
è 7 Remaining items
Using the Select/Set Wheel . Rotate and push the :
OPERATION automatically appears. 9.1,
- See page 5 for more on D.S.T. (Daylight Saving Time)
Rotate (2) Push
nora"
Ma
^ — ' i Push MENU twice
TIT
Co
to start the clock
2/ 2/1906 FRI 1:30PM
¡ MENU | and exit this mode.
PUSHTO PUSH TO A wl)
SET SET
to make selection to enter selection TO START PUSH MENU KEY
10