Panasonic Omnivision PV-8450 Operating Instructions Manual page 29

Using the Multi-Brand Control
Once the remote control has been properly set up, you can select VCR, TV, or DSS/CABLE mode
depending on which functions you wish to control.
Press VCR or TV or DSS/CABLE on the remote control to select the desired mode.
(See below for the controllable functions of each mode.)
NOTE:
In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing NUMBERED
keys for channel selection.
VCR Mode TV Mode
In VCR mode, the following In TV mode, the following buttons are
buttons are available. available.
y£B IV
All function buttons. POWER, INPUT, NUMBERED
TV keys, ENTER, CH UP/DOWN,
VOL UP/DOWN UP/DOWN
VCR
VCR/TV, PLAY. STOP, FF, REW,
PAUSE, SLOW, REC, SAP/Hi-Fi,
SPEED, COUNTER RESET,
ZERO/1 MIN.
OHSf CABLE Mode
In DSS/CABLE nKxje, the following
buttons are available.
POWER. NUMBERED keys;
ENTER, CH UP/DOWN
lY
VOL UP/DOWN
VCR
VCRm/, PLAY, STOP, FF, REW,
PAUSE, SLOW. REC. SAP/Hi-Fi,
SPEED. COUNTER RESET,
ZERO/1 MIN.
29