Table of Contents
Advertisement
5.1.8 UPnP always failed
UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding
automatically because of firewall or anti-virus software. It also has much relation with router's security settings. So we
recommend you do port forwarding manually. You can view your camera in internet successfully after you do port
forwarding manually in your router (Figure 4.30).
5.1.9 Camera can not connect wireless
If your camera could not connect wireless after you set wireless settings and plug out the cable. Please check whether
your settings are correct or not.
Normally, camera can't connect wireless mainly because of wrong settings.
Make sure broadcast your SSID; use the same encryption for router and camera.
5.1.10 Can't see other cameras listed in multi-device when using remote
access
If you want to view all the cameras via the WAN, verify that each camera added in the multi-device settings can be
accessed by using the DDNS name and port number. Use the DDNS domain name not the camera's LAN IP. (For more
details see: How to add cameras in WAN)
5.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded FOSCAM domain name
Username and password
Default admin username: admin with a blank password
5.3 Specifications
ITEMS
Image Sensor
Display Resolution
Image Sensor
Lens
Mini. Illumination
Lens Type
Lens
IR CUT
Image Compression
Resolution
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
High Definition Color CMOS Sensor
1280 x 720 Pixels
f: 2.8mm
0Lux
Glass Lens
Filter will change automatically
H.264
720p（1280 x 720） ，VGA（640 x 480）
www.foscam.com
FI9818W V2
75
Advertisement
Table of Contents
