Access The Camera In Wan - Foscam FI9818W V2 User Manual

www.foscam.com

2.2 Access the Camera in WAN

2.2.1 Static IP Addresses
Users who have static IP addresses do not need to set DDNS service settings for remote access. When you have
finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly
from the Internet using the WAN IP address and port number.
How to Obtain the WAN IP address from a public website ？
To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The
webpage at this address will show you the current WAN IP.
Figure 2.8
Access your IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number in
your standard browser. For example, you would enter http:// 183.37.28.254:85
NOTE :
Make sure port forwarding is successful. You can do port forwarding two ways.
Shenzhen Foscam Intelligent Technology Co., Limited
7
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168