Table of Contents
Advertisement
Using the push button
Changing programs
•
Push the button briefly to switch from one program to the next.
You will hear one or more beeps. The number of beeps indicates which
program you have selected.
NOTE: If you have two hearing aids with synchronisation enabled, a
change of program on one hearing aid automatically applies to the
second hearing aid as well. The same number of beeps will then sound
in the second hearing aid.
Turning your hearing aids OFF and ON
See "Using your hearing aids", page 14.
When you turn the hearing aids off and on again, they always start up in program 1 and your pre-set volume level.
Customising the button actions
If you want to be able to adjust the volume on the hearing aids, the push button on one hearing aid can be set to
reduce the volume, and the button on the other hearing aid can be set to increase the volume. Any increase or
decrease made on one hearing aid will also apply to the other to ensure the volume is the same in both hearing
aids.
Your hearing care professional can change the default settings and fill in the table below to record the new
settings:
18
Using your hearing aids
Advertisement
Table of Contents
