Setting Midi Channel - Roland MKB-200 Owner's Manual

b. Setting MIDI Channel
To control the.receive device (sound module) by
the transmit device (MKB-200), it is necessary to
set the MIDI channels of the both devices to the
same number. The MKB-200 can have two diffe-
rent MIDI channels at a time, therefore can con-
trol two sound modules simultaneously. The
following is how to set the MIDI channel number.
@ Push the Program Change Button @.
PROGRAM
CHANGE
&
The indicator lights up.
@ To set the MIDI channel of the Lower
section, push the L of the U/L Selector
Buttons @, and for setting the Upper
channel, push the U button.
To select the Lower Channei Mode
oo @ 0 eo
wm sar kU Tv
To select the Upper Channel Mode
o0 00 @ oe
wa wr Ei 7
MIDI CHANNEL
@® Hold the Function Button @ down.
The Display will show the current MIDI channel
number.
Flashing
Current Program Current MIDI
Change Number Channel
@® While still holding the Function Button @
down, press the appropriate key for the
new MIDI channel. (See the picture shown
on the bottom of this page to find the appro-
priate key.)
The Display will show the MIDI cahnnel number
you have set.
@® Release the Function Button.
The Display now shows the Program Change
number.
|
B